David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 1997 Subaru Legacy. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Legacy's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Legacy is relatively easy - turn your hazard lights on and check the front of your Legacy and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Legacy, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?1997 Subaru Legacy L 2.2L 4 Cyl. Wagon
The burnt out tail light: classic reason for a cop to pull you over - change yours now1997 Subaru Legacy L 2.2L 4 Cyl. Wagon
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber1997 Subaru Legacy L 2.2L 4 Cyl. Wagon
Avoid tickets and accidents with both working headlights! New bulbs are much brighter too1997 Subaru Legacy L 2.2L 4 Cyl. Wagon
Low coolant levels is all to common - top yours up today1997 Subaru Legacy L 2.2L 4 Cyl. Wagon
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!1997 Subaru Legacy L 2.2L 4 Cyl. Wagon