How To Open Hood: 2002 Mazda Protege ES 2.0L 4 Cyl.

Mazda Protege Model Years - 1999, 2000, 2001, 2002, 2003

Open the Hood - Locate hood latches and open the hood

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2002 Mazda Protege ES 2.0L 4 Cyl. Windshield Wiper Blade (Front) Replace Wiper Blades

Did you know that the sun wears out wiper blades faster than rain? Replace your blades twice a year

2002 Mazda Protege ES 2.0L 4 Cyl. Coolant (Antifreeze) Check Coolant Level

Your coolant should perform well under any condition - just like Aaron Rodgers!

2002 Mazda Protege ES 2.0L 4 Cyl. Fuse (Engine) Check

Odd electrical problems that come out of nowhere can often signify a blown engine fuse - check and change yours here!

2002 Mazda Protege ES 2.0L 4 Cyl. Air Filter (Cabin) Check

Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 2002 Mazda Protege. Popping the hood, or bonnet, on your Protege is a two step process, you need to release the hood latch inside your Protege and then you need to release the safety latch under your hood in the front of your Protege. The video above shows you the location of both hood latches.

Sometimes, the hood on Mazdas gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your Protege, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your Protege with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older Proteges, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2002 Mazda Protege is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20