Honda City helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to change the oil and oil filter in your 2003 GMC Envoy. When you change your own oil, you know that you are putting quality oil in your Envoy and that the filter is being changed too. Most importantly, you get a chance to look around under your Envoy for potential trouble spots. This video shows you the location of your oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your Envoy. For most GMCs, you can wrap an old belt around the oil filter and unscrew it by hand. If you can't do this, see our parts page to find a GMC Envoy oil filter wrench. If your Envoy is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Envoy.
Most GMCs have the oil type printed on the oil cap - it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn't printed on the oil cap, check your owners manual for the exact type before adding new oil. We recommend wearing safety glasses whenever you are working under your Envoy. You never know what could be dripping down from the engine, battery acid, engine coolant, brake fluid, etc. All of these fluids are extremely harmful to your eyes and skin so it is important to protect yourself.
Burnt out brake lights increase your chance of getting rear ended - check and change yours today2003 GMC Envoy SLT 4.2L 6 Cyl.
The burnt out tail light: classic reason for a cop to pull you over - change yours now2003 GMC Envoy SLT 4.2L 6 Cyl.
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2003 GMC Envoy SLT 4.2L 6 Cyl.
White light when you back up - yup, they burn out and you can replace them with bright LEDs2003 GMC Envoy SLT 4.2L 6 Cyl.
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2003 GMC Envoy SLT 4.2L 6 Cyl.
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2003 GMC Envoy SLT 4.2L 6 Cyl.