How to Add Oil: 2003 Subaru Forester XS 2.5L 4 Cyl.

Subaru Forester Model Years - 2003, 2004, 2005

How to remove oil cap and add the correct oil type

Car Displayed: 2006 Subaru Forester X 2.5L 4 Cyl. info

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2006 Subaru Forester X 2.5L 4 Cyl. Transmission Fluid Add Fluid

If your transmission is running low on fluid, be sure to add some - find out how to do this here!

2006 Subaru Forester X 2.5L 4 Cyl. Coolant (Antifreeze) Flush Coolant

Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!

2006 Subaru Forester X 2.5L 4 Cyl. Transmission Fluid Fix Leaks

Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot

2006 Subaru Forester X 2.5L 4 Cyl. Oil Check Oil Level

Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

The video above shows you how to add oil to your 2003 Subaru Forester. Before adding oil to your Forester, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Forester has a low oil level. For most Subarus, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Forester, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Forester and how to add oil. Adding too much oil to your Forester can be harmful, so it is easiest to add a little at a time.

If you add too much oil to your Forester, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.

  • Advance Auto coupon for
    20% off entire order: KIOSK20