Reina helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2003 Suzuki XL-7. Before adding oil to your XL-7, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your XL-7 has a low oil level. For most Suzukis, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your XL-7, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your XL-7 and how to add oil. Adding too much oil to your XL-7 can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your XL-7, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2003 Suzuki XL-7 Touring 2.7L V6
Minor transmission fluid leaks can often be fixed with the right sealant - see how to do this2003 Suzuki XL-7 Touring 2.7L V6
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2003 Suzuki XL-7 Touring 2.7L V6
DRLs are on more than your headlights. They burn out faster and should be replaced regularly2003 Suzuki XL-7 Touring 2.7L V6
See how to seal up minor power steering fluid leaks2003 Suzuki XL-7 Touring 2.7L V6