David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you to replace the headlight in your 2006 Honda CR-V. Headlights grow dimmer by up to 20% over time and eventually burn out - for this reason, we recommend changing your headlights in pairs. Changing both headlight bulbs on your CR-V at the same time will allow both bulbs to have the same intensity and prevent the new headlight bulb from appearing brighter than the bulb on the opposite side. In some Hondas, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb (and vise versa). Some Hondas have high intensity discharge headlights, sometimes referred to as xenon lights. These bulbs have a very high voltage that runs through them, even if the battery is disconnected. If your CR-V has this type of bulb, we do not recommend that you attempt to change it yourself.
When you change the headlight on your CR-V, it is important to not touch the glass part of the bulb with your fingers because the oil from your fingertips will cause that part of the bulb to burn hotter, which significantly shortens the life of the bulb.
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2006 Honda CR-V SE 2.4L 4 Cyl.
Animals love the sweet smell of antifreeze, too bad it's toxic! Fix your minor leaks2006 Honda CR-V SE 2.4L 4 Cyl.
Learn how to diagnose and fix minor oil leaks in your car2006 Honda CR-V SE 2.4L 4 Cyl.
If you have an electrical component that doesn't work, try replacing the fuse first2006 Honda CR-V SE 2.4L 4 Cyl.
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!2006 Honda CR-V SE 2.4L 4 Cyl.
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2006 Honda CR-V SE 2.4L 4 Cyl.