Reina helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2006 Mazda 6. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your 6's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your 6 is relatively easy - turn your hazard lights on and check the front of your 6 and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your 6, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door)
White light when you back up - yup, they burn out and you can replace them with bright LEDs2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door)
Power steering fluid is easy to check and many people (mechanics included) often forget about - learn how here2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door)
Got a short fuse? Don't blow a fuse, change it!2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door)
See how to seal up minor power steering fluid leaks2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door)