Lake Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2006 Subaru B9 Tribeca. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your B9 Tribeca's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your B9 Tribeca is relatively easy - turn your hazard lights on and check the front of your B9 Tribeca and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your B9 Tribeca, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2006 Subaru B9 Tribeca 3.0L 6 Cyl.
If your transmission is running low on fluid, be sure to add some - find out how to do this here!2006 Subaru B9 Tribeca 3.0L 6 Cyl.
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!2006 Subaru B9 Tribeca 3.0L 6 Cyl.
The burnt out tail light: classic reason for a cop to pull you over - change yours now2006 Subaru B9 Tribeca 3.0L 6 Cyl.
Learning how to jump your car before you need to is an excellent idea2006 Subaru B9 Tribeca 3.0L 6 Cyl.