Oil & Filter Change 2007 BMW 525i 3.0L 6 Cyl.

BMW 525i Model Years - 2004, 2005, 2006, 2007, 2008, 2009, 2010

How to replace the oil filter and change oil in a 2007 525i

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2007 BMW 525i 3.0L 6 Cyl. Lights Center Brake Light (replace bulb)

Don't be the guy with your third brake light burnt out

2007 BMW 525i 3.0L 6 Cyl. Oil Check Oil Level

Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary

2007 BMW 525i 3.0L 6 Cyl. Tires & Wheels Check Tire Pressure

Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw

2007 BMW 525i 3.0L 6 Cyl. Lights Highbeam (replace bulb)

On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Learn how to change the oil and oil filter in your 2007 BMW 525i with this free video. What type of oil is required in a 525i? You can use synthetic oil in any modern vehicle. Many vehicles will require the use of 100% synthetic oil, others allow synthetic blend, which is a mix of synthetic and conventional oil, and conventional oil too. The synthetic oil vs conventional oil debate has many proponents on both sides. Synthetic oil will not break down over time and tends to have longer change intervals, so if you want to have more time between oil changes, then synthetic oil is a good choice. Conventional oil works well for drivers who change their oil regularly and if it is approved for your 525i. The owners manual will indicate if your 2007 525i takes 0W-20, 0W-30, 5W-20, 5W-30 or 10W-30. This video shows the location of the oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your 525i. For most BMWs, you can wrap an old belt around the oil filter and unscrew it by hand. If you can't do this, see our parts page to find a BMW 525i oil filter wrench. If your 525i is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your 525i.

We recommend wearing safety glasses whenever you are working under your 525i. You never know what could be dripping down from the engine, battery acid, engine coolant, brake fluid, etc. All of these fluids are harmful to your eyes and skin so it is important to protect yourself.

  • Advance Auto coupon for
    20% off entire order: KIOSK20