Braeger Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2007 Subaru Legacy. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Legacy's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Legacy is relatively easy - turn your hazard lights on and check the front of your Legacy and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Legacy, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
DRLs are on more than your headlights. They burn out faster and should be replaced regularly2007 Subaru Legacy 2.5i Special Edition 2.5L 4 Cyl. Sedan
Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!2007 Subaru Legacy 2.5i Special Edition 2.5L 4 Cyl. Sedan
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2007 Subaru Legacy 2.5i Special Edition 2.5L 4 Cyl. Sedan
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2009 Subaru Outback 2.5i Limited 2.5L 4 Cyl.
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2007 Subaru Legacy 2.5i Special Edition 2.5L 4 Cyl. Sedan
Small bulbs that burn out regularly - did you know you can replace these with LED lights?2007 Subaru Legacy 2.5i Special Edition 2.5L 4 Cyl. Sedan