How to Add Oil: 2008 Acura RL 3.5L V6
Acura RL Model Years - 2005, 2006, 2007, 2008
How to remove oil cap and add the correct oil type
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
DRLs are on more than your headlights. They burn out faster and should be replaced regularly
Did you know that heat is worse for your battery than cold? Replace it every 4 years
Is the clock in your car ahead or behind? Learn how to set it here!
- BMW of MKE North helped make these videos
- Feedback
- Download Acura owners manuals
The video above shows you how to add oil to your 2008 Acura RL. Before adding oil to your RL, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your RL has a low oil level. For most Acuras, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your RL, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your RL and how to add oil. Adding too much oil to your RL can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your RL, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
- Advance Auto coupon for
20% off entire order: KIOSK20
