Coolant Flush How-to: 2008 BMW 328xi 3.0L 6 Cyl. Sedan (4 Door)

BMW 328xi Model Years - 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

How to drain coolant and do a radiator flush

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2008 BMW 328xi 3.0L 6 Cyl. Sedan (4 Door) Power Steering Fluid Check Fluid Level

Power steering fluid is easy to check and many people (mechanics included) often forget about - learn how here

2008 BMW 328xi 3.0L 6 Cyl. Sedan (4 Door) Fuse (Interior) Replace

Got a short fuse? Don't blow a fuse, change it!

2008 BMW 328xi 3.0L 6 Cyl. Sedan (4 Door) Battery Jumpstart

Learning how to jump your car before you need to is an excellent idea

2008 BMW 328xi 3.0L 6 Cyl. Sedan (4 Door) Clock Set Clock

Is the clock in your car ahead or behind? Learn how to set it here!

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Learn how to flush the coolant (antifreeze) in your 2008 BMW 328xi. Coolant / antifreeze circulates through 328xi radiator and engine to maintain the proper temperature. Coolant / antifreeze also passes through the heater core under your cowl to provide heat to the cabin of your 328xi. In addition to preventing your car from overheating, coolant / antifreeze also helps lubricate the seals in the water pump and hoses. Start your coolant flush by draining the coolant / antifreeze that is in your reservoir, then drain the coolant that is in your radiator by opening the petcock or removing the lower radiator hose. This video shows where the radiator drain plug (petcock) is located on a 2008 BMW 328xi. Fill up the radiator with distilled water and run the engine. Turn off the engine and drain the water, fill up the radiator with antifreeze until you have a 50/50 coolant / distilled water mixture and burp the system.

Like the oil in your 328xi, coolant gets dirty over time and loses its ability to cool down your 3.0 liter engine. When you flush your coolant, which is antifreeze, on your 2008, you are draining out all of the old dirty coolant and preventing costly radiator and cooling system repair down the road. The video above shows you where the petcock on your radiator is located, how to flush the coolant / antifreeze and how to burp the system to get the air out of your 328xi.

Coolant is toxic and animals are attracted to the sweet taste of coolant (antifreeze). If you spill coolant when you flush your 328xi, be sure to put down cat litter to soak it up to discard it. Flushing the coolant on a regular basis removes gunk and mineral deposits from your engine, while prolonging the life of your heater core, thermostat, hoses and water pump.

  • Advance Auto coupon for
    20% off entire order: KIOSK20