Oil & Filter Change 2008 BMW X5 3.0si 3.0L 6 Cyl.

BMW X5 Model Years - 2007, 2008, 2009, 2010, 2011, 2012, 2013

How to replace the oil filter and change oil in a 2008 X5

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2008 BMW X5 3.0si 3.0L 6 Cyl. Lights Daytime Running Light (replace bulb)

DRLs are on more than your headlights. They burn out faster and should be replaced regularly

2008 BMW X5 3.0si 3.0L 6 Cyl. Lights Tail Light (replace bulb)

The burnt out tail light: classic reason for a cop to pull you over - change yours now

2008 BMW X5 3.0si 3.0L 6 Cyl. Tires & Wheels Change a Flat Tire

Learn where your spare tire and jack are located before you need it on the side of the road

2008 BMW X5 3.0si 3.0L 6 Cyl. Battery Jumpstart

Learning how to jump your car before you need to is an excellent idea

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Learn how to change the oil and oil filter in your 2008 BMW X5 with this free video. What type of oil is required in a X5? You can use synthetic oil in any modern vehicle. Many vehicles will require the use of 100% synthetic oil, others allow synthetic blend, which is a mix of synthetic and conventional oil, and conventional oil too. The synthetic oil vs conventional oil debate has many proponents on both sides. Synthetic oil will not break down over time and tends to have longer change intervals, so if you want to have more time between oil changes, then synthetic oil is a good choice. Conventional oil works well for drivers who change their oil regularly and if it is approved for your X5. The owners manual will indicate if your 2008 X5 takes 0W-20, 0W-30, 5W-20, 5W-30 or 10W-30. This video shows the location of the oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your X5. For most BMWs, you can wrap an old belt around the oil filter and unscrew it by hand. If you can't do this, see our parts page to find a BMW X5 oil filter wrench. If your X5 is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your X5.

We recommend wearing safety glasses whenever you are working under your X5. You never know what could be dripping down from the engine, battery acid, engine coolant, brake fluid, etc. All of these fluids are harmful to your eyes and skin so it is important to protect yourself.

  • Advance Auto coupon for
    20% off entire order: KIOSK20