David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2008 Dodge Caliber. We recommend that you change both the driver and passenger side bulbs at the same time on your Caliber as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Caliber's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Caliber and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Caliber, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2007 Dodge Caliber SXT 2.0L 4 Cyl.
Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping2007 Dodge Caliber SXT 2.0L 4 Cyl.
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2008 Dodge Caliber SE 2.0L 4 Cyl.
Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?2007 Dodge Caliber SXT 2.0L 4 Cyl.
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2008 Dodge Caliber SE 2.0L 4 Cyl.
Harsh downshifts? Slipping gears? You might be low on transmission fluid2007 Dodge Caliber SXT 2.0L 4 Cyl.