Rosen Nissan helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to add transmission fluid to your 2008 Dodge Caliber. Before adding transmission fluid, make sure that your engine was running when you checked the fluid level. If the transmission fluid level on your Caliber is low, you need to add fluid through the dipstick tube. Dodge has been developed sophisticated transmissions through years and it is critical that you add the exact type of transmission fluid stipulated by your owner's manual (typically in the back of the manual in a section titled Fluid Capacities.) When adding transmission fluid to your Caliber, be sure to add it slowly as the transmission fluid capacity is reached quickly and it is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Caliber, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2008 Dodge Caliber SE 2.0L 4 Cyl.
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!2008 Jeep Compass Sport 2.0L 4 Cyl.
Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping2008 Jeep Compass Sport 2.0L 4 Cyl.
White light when you back up - yup, they burn out and you can replace them with bright LEDs2008 Dodge Caliber SE 2.0L 4 Cyl.
Odd electrical problems that come out of nowhere can often signify a blown engine fuse - check and change yours here!2008 Dodge Caliber SE 2.0L 4 Cyl.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2008 Jeep Compass Sport 2.0L 4 Cyl.