1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Remove Oil Cap - Take off the oil fill cap
4. Add Oil - Determine the correct oil type and add oil
5. Replace Cap - Put the oil fill cap back on the engine
6. More Info. - Additional information on adding oil
The video above shows you how to add oil to your 2008 GMC Yukon. Before adding oil to your Yukon, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Yukon has a low oil level. For most GMCs, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Yukon, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Yukon and how to add oil. Adding too much oil to your Yukon can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Yukon, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car
You love your kids right? See how to properly secure their car seat.