Braeger Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2008 Infiniti M35. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your M35's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your M35 is relatively easy - turn your hazard lights on and check the front of your M35 and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your M35, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!2008 Infiniti M35 X 3.5L V6
If you have an electrical component that doesn't work, try replacing the fuse first2008 Infiniti M35 X 3.5L V6
Learn where your spare tire and jack are located before you need it on the side of the road2008 Infiniti M35 X 3.5L V6
If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner2008 Infiniti M35 X 3.5L V6
A few key tips will make jacking up your car much safer2008 Infiniti M35 X 3.5L V6
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2008 Infiniti M35 X 3.5L V6