1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Remove Bulb - Steps to remove a burnt out bulb
4. Helpful Hints - How to find replacement bulb type and other hints
5. Replace Bulb - Procedures to replace the new bulb
6. More Info. - Additional information on changing parking lights
The video above shows you how to change the parking light bulb in your 2008 Mazda CX-7. The parking light is typically orange in color and in some CX-7s is the same bulb as the turn signal. The parking light bulb grows dimmer over time and we recommend that you change both bulbs on your CX-7 at the same time, even if only one is burnt out. It is possible for the turn signal portion of the bulb to burn out and for the parking light to continue to function properly and vice versa - replacing the bulb will restore functionality of both in your CX-7.
When changing the parking light in your CX-7, be careful not to touch the glass part of the new bulb with your finger as this will cause it to burn out quicker. We recommend using gloves or a piece of paper towel to limit the potential of touching the bulb.
Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!
Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!
Learn where your spare tire and jack are located before you need it on the side of the road