David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2008 Peugeot 107. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your 107's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your 107 is relatively easy - turn your hazard lights on and check the front of your 107 and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your 107, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2008 Peugeot 107 Trendy 1.0L 3 Cyl.
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2008 Peugeot 107 Trendy 1.0L 3 Cyl.
White light when you back up - yup, they burn out and you can replace them with bright LEDs2008 Peugeot 107 Trendy 1.0L 3 Cyl.
Learn where your air filter is located and how to determine if it needs to be changed.2008 Peugeot 107 Trendy 1.0L 3 Cyl.
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber2008 Peugeot 107 Trendy 1.0L 3 Cyl.