How To Open Hood: 2009 Acura MDX 3.7L V6

Acura MDX Model Years - 2007, 2008, 2009, 2010, 2011, 2012, 2013

Open the Hood - Locate hood latches and open the hood

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2009 Acura MDX 3.7L V6 Transmission Fluid Add Fluid

If your transmission is running low on fluid, be sure to add some - find out how to do this here!

2009 Acura MDX 3.7L V6 Coolant (Antifreeze) Flush Coolant

Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!

2009 Acura MDX 3.7L V6 Battery Replace

Did you know that heat is worse for your battery than cold? Replace it every 4 years

2009 Acura MDX 3.7L V6 Lights Daytime Running Light (replace bulb)

DRLs are on more than your headlights. They burn out faster and should be replaced regularly

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 2009 Acura MDX. Popping the hood, or bonnet, on your MDX is a two step process, you need to release the hood latch inside your MDX and then you need to release the safety latch under your hood in the front of your MDX. The video above shows you the location of both hood latches.

Sometimes, the hood on Acuras gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your MDX, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your MDX with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older MDXs, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2009 Acura MDX is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20