Braeger Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to add transmission fluid to your 2010 Dodge Avenger. Before adding transmission fluid, make sure that your engine was running when you checked the fluid level. If the transmission fluid level on your Avenger is low, you need to add fluid through the dipstick tube. Dodge has been developed sophisticated transmissions through years and it is critical that you add the exact type of transmission fluid stipulated by your owner's manual (typically in the back of the manual in a section titled Fluid Capacities.) When adding transmission fluid to your Avenger, be sure to add it slowly as the transmission fluid capacity is reached quickly and it is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Avenger, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
Harsh downshifts? Slipping gears? You might be low on transmission fluid2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
A check engine light can be cleared with a simple fix or it could be a major problem - find out now!2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
Don't be the guy with your third brake light burnt out2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
If you have an electrical component that doesn't work, try replacing the fuse first2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)