How to Add Oil: 2010 Fiat Panda Active 1.2L 4 Cyl.

Fiat Panda Model Years - 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

How to remove the oil cap, add the correct oil type, check oil capacity, and fix minor oil leaks

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2010 Fiat Panda Active 1.2L 4 Cyl. Lights Parking Light (replace bulb)

Small bulbs that burn out regularly - did you know you can replace these with LED lights?

2010 Fiat Panda Active 1.2L 4 Cyl. Fuse (Engine) Replace

If you have an electrical component that doesn't work, try replacing the fuse first

2010 Fiat Panda Active 1.2L 4 Cyl. Lights Daytime Running Light (replace bulb)

DRLs are on more than your headlights. They burn out faster and should be replaced regularly

2010 Fiat Panda Active 1.2L 4 Cyl. Air Filter (Cabin) Replace

Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

See how to add oil to your 2010 Fiat Panda and where to add oil. This video shows the location of the oil filler cap and how to find the filler cap in a 2010 Panda. Before adding oil to your Panda, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Panda has a low oil level.

How much oil does my car take? For most Fiats, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil to get to a point where the car is safe to drive. If you drained all of the oil, check your owners manual for the 2010 Fiat Panda oil capacity.

Why is my car low on oil? Your car is leaking oil or your car is burning oil. Symptoms of an oil leak include oil leak coming from the Panda’s oil drain plug, a leaky oil filter gasket, a leak at the rear main seal, a loose oil fill plug or any other location that causes oil to leak under the car. It is typically okay to drive a car with an oil leak as long as you add fluid regularly and do not let the fluid leak get too low. You can often fix an oil leak yourself for cheap by adding an oil leak stopper directly to the Panda oil fill hole. Otherwise, you need to identify where the oil leak is coming from and fix that part.

If your 2010 Fiat has a low oil light on, that means you have low oil pressure, which indicates a mechanical problem and you should not drive your car and turn your engine off.

  • Advance Auto coupon for
    20% off entire order: KIOSK20