How To Open Hood: 2010 Hummer H3T Alpha 5.3L V8 FlexFuel

Hummer H3T Model Years - 2009, 2010

Open the Hood - Locate hood latches and open the hood

Car Displayed: 2009 Hummer H3 3.7L 5 Cyl. info

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2009 Hummer H3 3.7L 5 Cyl. Fuse (Interior) Check

Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!

2009 Hummer H3 3.7L 5 Cyl. Coolant (Antifreeze) Fix Leaks

Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it

2008 Hummer H3 3.7L 5 Cyl. Lights Turn Signal - Front (replace bulb)

If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb

2008 Hummer H3 3.7L 5 Cyl. Lights Highbeam (replace bulb)

On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 2010 Hummer H3T. Popping the hood, or bonnet, on your H3T is a two step process, you need to release the hood latch inside your H3T and then you need to release the safety latch under your hood in the front of your H3T. The video above shows you the location of both hood latches.

Sometimes, the hood on Hummers gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your H3T, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your H3T with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older H3Ts, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2010 Hummer H3T is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20