How to Add Oil: 2010 Hyundai Santa Fe SE 3.5L V6
Hyundai Santa Fe Model Years - 2007, 2008, 2009, 2010, 2011, 2012
How to remove oil cap and add the correct oil type
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
If your transmission is running low on fluid, be sure to add some - find out how to do this here!
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit
If you have an electrical component that doesn't work, try replacing the fuse first
DRLs are on more than your headlights. They burn out faster and should be replaced regularly
- BMW of MKE North helped make these videos
- Feedback
- Download Hyundai owners manuals
The video above shows you how to add oil to your 2010 Hyundai Santa Fe. Before adding oil to your Santa Fe, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Santa Fe has a low oil level. For most Hyundais, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Santa Fe, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Santa Fe and how to add oil. Adding too much oil to your Santa Fe can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Santa Fe, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
- Advance Auto coupon for
20% off entire order: KIOSK20
