Reina helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you to replace the headlight in your 2010 Mazda 6. Headlights grow dimmer by up to 20% over time and eventually burn out - for this reason, we recommend changing your headlights in pairs. Changing both headlight bulbs on your 6 at the same time will allow both bulbs to have the same intensity and prevent the new headlight bulb from appearing brighter than the bulb on the opposite side. In some Mazdas, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb (and vise versa). Some Mazdas have high intensity discharge headlights, sometimes referred to as xenon lights. These bulbs have a very high voltage that runs through them, even if the battery is disconnected. If your 6 has this type of bulb, we do not recommend that you attempt to change it yourself.
When you change the headlight on your 6, it is important to not touch the glass part of the bulb with your fingers because the oil from your fingertips will cause that part of the bulb to burn hotter, which significantly shortens the life of the bulb.
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2010 Mazda 6 S 3.7L V6
If your transmission is running low on fluid, be sure to add some - find out how to do this here!2010 Mazda 6 S 3.7L V6
Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?2010 Mazda 6 S 3.7L V6
Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary2010 Mazda 6 S 3.7L V6
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2010 Mazda 6 S 3.7L V6