Lake Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The reverse light is the white light that lights up when your 6 is in reverse. The video above shows you how to change the reverse light in your 2010 Mazda 6. These bulbs burn out occasionally and help you see when you are backing up. The reverse light gets dimmer over time and we suggest changing them in pairs.
Try not to touch the glass part of the new bulb with your finger when changing the reverse light in your 6, the oil in your finger will cause the that part of the reverse light bulb to burn hotter out therefore burn out quicker. Using gloves or a piece of paper towel will limit the potential of touching the bulb.
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2010 Mazda 6 S 3.7L V6
A/C blowing hot air?2010 Mazda 6 S 3.7L V6
If your transmission is running low on fluid, be sure to add some - find out how to do this here!2010 Mazda 6 S 3.7L V6
Don't be the guy with your third brake light burnt out2010 Mazda 6 S 3.7L V6
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2010 Mazda 6 S 3.7L V6