Lake Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to add transmission fluid to your 2010 Mazda 6. Before adding transmission fluid, make sure that your engine was running when you checked the fluid level. If the transmission fluid level on your 6 is low, you need to add fluid through the dipstick tube. Mazda has been developed sophisticated transmissions through years and it is critical that you add the exact type of transmission fluid stipulated by your owner's manual (typically in the back of the manual in a section titled Fluid Capacities.) When adding transmission fluid to your 6, be sure to add it slowly as the transmission fluid capacity is reached quickly and it is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your 6, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2010 Mazda 6 S 3.7L V6
See how to seal up minor power steering fluid leaks2010 Mazda 6 S 3.7L V6
White light when you back up - yup, they burn out and you can replace them with bright LEDs2010 Mazda 6 S 3.7L V6
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2010 Mazda 6 S 3.7L V6
Harsh downshifts? Slipping gears? You might be low on transmission fluid2010 Mazda 6 S 3.7L V6
A/C blowing hot air?2010 Mazda 6 S 3.7L V6