Lake Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The engine in your 2010 Mazda 6 should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where the transmission fluid dipstick is located in your 6 and how to check the transmission fluid level. If the transmission fluid level in your 6 is low, you need to add transmission fluid through the dipstick tube. When adding transmission fluid to your 6, be sure to add it slowly as it will fill up quickly and is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your 6, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
Is the clock in your car ahead or behind? Learn how to set it here!2010 Mazda 6 S 3.7L V6
Don't be the guy with your third brake light burnt out2010 Mazda 6 S 3.7L V6
Got a short fuse? Don't blow a fuse, change it!2010 Mazda 6 S 3.7L V6
Did you know that heat is worse for your battery than cold? Replace it every 4 years2010 Mazda 6 S 3.7L V6
A few key tips will make jacking up your car much safer2010 Mazda 6 S 3.7L V6
Want an easy way to save $500? Rotate your tires at least three times per year2010 Mazda 6 S 3.7L V6