Intl. Autos helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to jump start a dead battery in your 2011 Dodge Nitro. If you get into your Nitro, turn the key, and your car doesn't start (you may hear nothing or a clicking sound from the engine bay), you have a dead battery and need a jump-start. Check to see if you left your headlights or an interior light on and turn the switch off. Assuming that you have a pair of jumper cables, a pair of safety glasses and a friend to give you a jumpstart, the video above will show you where to connect the cables (and in what order!) for your Nitro. Once you are finished reviving a dead car battery in your Nitro, make sure you drive it for at least 5 minutes before turning it off so your battery isn't dead the next time.
So what's up with the safety glasses? There is a small possibility of a battery exploding during the charging process if you don't connect the cables properly (causing a spark) and there is a bunch of hydrogen gas around the battery (car batteries emit hydrogen gas when they discharge) - this is much more of an issue with cars that haven't been driven for a long time than if you drive your Nitro regularly and simply forgot to turn your lights off.
Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?2011 Dodge Nitro Heat 3.7L V6
Want an easy way to save $500? Rotate your tires at least three times per year2011 Dodge Nitro Heat 3.7L V6
Your coolant should perform well under any condition - just like Aaron Rodgers!2011 Dodge Nitro Heat 3.7L V6
A check engine light can be cleared with a simple fix or it could be a major problem - find out now!2011 Dodge Nitro Heat 3.7L V6
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2011 Dodge Nitro Heat 3.7L V6