Lake Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2011 Dodge Nitro. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Nitro's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Nitro is relatively easy - turn your hazard lights on and check the front of your Nitro and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Nitro, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2011 Dodge Nitro Heat 3.7L V6
Did you know that heat is worse for your battery than cold? Replace it every 4 years2011 Dodge Nitro Heat 3.7L V6
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber2011 Dodge Nitro Heat 3.7L V6
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit2011 Dodge Nitro Heat 3.7L V6
Minor transmission fluid leaks can often be fixed with the right sealant - see how to do this2011 Dodge Nitro Heat 3.7L V6