Lake Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to change the oil and oil filter in your 2011 Honda CR-Z. When you change your own oil, you know that you are putting quality oil in your CR-Z and that the filter is being changed too. Most importantly, you get a chance to look around under your CR-Z for potential trouble spots. This video shows you the location of your oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your CR-Z. For most Hondas, you can wrap an old belt around the oil filter and unscrew it by hand. If you can't do this, see our parts page to find a Honda CR-Z oil filter wrench. If your CR-Z is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your CR-Z.
Most Hondas have the oil type printed on the oil cap - it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn't printed on the oil cap, check your owners manual for the exact type before adding new oil. We recommend wearing safety glasses whenever you are working under your CR-Z. You never know what could be dripping down from the engine, battery acid, engine coolant, brake fluid, etc. All of these fluids are extremely harmful to your eyes and skin so it is important to protect yourself.
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car2011 Honda CR-Z EX 1.5L 4 Cyl.
Small bulbs that burn out regularly - did you know you can replace these with LED lights?2011 Honda CR-Z EX 1.5L 4 Cyl.
Got a short fuse? Don't blow a fuse, change it!2011 Honda CR-Z EX 1.5L 4 Cyl.
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2011 Honda CR-Z EX 1.5L 4 Cyl.
Don't be caught in the fog with burnt out fog light bulbs2011 Honda CR-Z EX 1.5L 4 Cyl.