EN
Parts & Tools Parts & Tools
Mechanics Mechanics
Gear Guide Gear Guide
search

How to Add Coolant: Mazda 3 (2010-2013)

Lake Ford helped make these videos

We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.

 
Video Description

Adding engine coolant (also known as antifreeze) to your 2011 Mazda 3 is pretty easy. Engine coolant circulates through your engine to keep it cool in the summer but won't freeze in the winter. Make sure to check your engine when it is cold for an accurate reading. The video above shows you where the coolant reservoir in your 3 is located and how to add coolant. Be sure to check your owners manual to determine the correct type of fluid to add - for Mazdas, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant with distilled water so that you have a combination of 50% coolant and 50% water. Some coolants will come premixed-that is, you don't need to add any water. These coolants will typically say 50/50 or pre-mixed on the front of the coolant bottle.

Removing the coolant reservoir cap on a warm engine could cause the cap to fly off at a high rate of speed and fluid to spray out of the reservoir. Always wear safety goggles when working on your 3. Promptly wipe up any spilled fluid as it is highly toxic. Animals love its sweet taste, so even a spilling a small amount on your garage floor can end up in the dog's stomach pretty quickly. If you notice an oily surface in your coolant, immediately have your mechanic inspect your 3 for head gasket leakage

Other videos you might find helpful

  • 2011 Mazda 3 Mazdaspeed 2.3L 4 Cyl. Turbo Lights Turn Signal - Rear (replace bulb)
    Change a rear blinker

    Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

    2011 Mazda 3 Mazdaspeed 2.3L 4 Cyl. Turbo
  • 2011 Mazda 3 Mazdaspeed 2.3L 4 Cyl. Turbo Brake Fluid Check Fluid Level
    Check your brake fluid

    Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping

    2011 Mazda 3 Mazdaspeed 2.3L 4 Cyl. Turbo
  • 2011 Mazda 3 Mazdaspeed 2.3L 4 Cyl. Turbo Fluid Leaks Power Steering Fluid (fix leaks)
    Seal minor power steering fluid leaks

    See how to seal up minor power steering fluid leaks

    2011 Mazda 3 Mazdaspeed 2.3L 4 Cyl. Turbo
  • 2011 Mazda 3 Mazdaspeed 2.3L 4 Cyl. Turbo Battery Replace
    Replace your car battery

    Did you know that heat is worse for your battery than cold? Replace it every 4 years

    2011 Mazda 3 Mazdaspeed 2.3L 4 Cyl. Turbo
  • 2011 Mazda 3 Mazdaspeed 2.3L 4 Cyl. Turbo Oil Add Oil
    Top up the oil level

    Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!

    2011 Mazda 3 Mazdaspeed 2.3L 4 Cyl. Turbo
  • 2011 Mazda 3 Mazdaspeed 2.3L 4 Cyl. Turbo Fuse (Engine) Replace
    Change an engine fuse

    If you have an electrical component that doesn't work, try replacing the fuse first

    2011 Mazda 3 Mazdaspeed 2.3L 4 Cyl. Turbo
  • See all videos for the 2011 Mazda 3
Comments
The Right Parts
The Right Tools
coolant drain pans stop leak safety glasses radiator hoses fluid pumps fuel injector cleaner gloves
Similar Cars in our Video Library