Honda City helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2011 Mazda 3. Before adding oil to your 3, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your 3 has a low oil level. For most Mazdas, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your 3, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your 3 and how to add oil. Adding too much oil to your 3 can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your 3, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Did you know that heat is worse for your battery than cold? Replace it every 4 years2011 Mazda 3 Mazdaspeed 2.3L 4 Cyl. Turbo
Minor transmission fluid leaks can often be fixed with the right sealant - see how to do this2010 Mazda 3 i 2.0L 4 Cyl.
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit2011 Mazda 3 Mazdaspeed 2.3L 4 Cyl. Turbo
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2010 Mazda 3 i 2.0L 4 Cyl.
Got a short fuse? Don't blow a fuse, change it!2011 Mazda 3 Mazdaspeed 2.3L 4 Cyl. Turbo