How to Add Brake Fluid: 2015 Subaru WRX Limited 2.0L 4 Cyl. Turbo

Subaru WRX Model Years - 2015, 2016, 2017, 2018, 2019, 2020, 2021

How to add brake fluid and check brake fluid level

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2015 Subaru WRX Limited 2.0L 4 Cyl. Turbo Air Filter (Cabin) Replace

Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors

2017 Subaru Impreza Limited 2.0L 4 Cyl. Hatchback Transmission Fluid Check Fluid Level

Harsh downshifts? Slipping gears? You might be low on transmission fluid

2015 Subaru WRX Limited 2.0L 4 Cyl. Turbo Air Conditioner Recharge Freon

If your car blows hot air when your air conditioner is turned on, try recharging the freon first

2015 Subaru WRX Limited 2.0L 4 Cyl. Turbo Coolant (Antifreeze) Fix Leaks

Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

When you hit the brake pedal in your 2015 Subaru WRX it pumps brake fluid down to your brakes which increases the pressure to make your car slow down. If you don't have enough brake fluid in the brake fluid reservoir, air can get in your brake lines and your WRX won't stop properly. The video above shows you how to add brake fluid to your Subaru WRX. If you are adding brake fluid to your WRX on a regular basis, you should check for leaks (we have a video for this too!) As with most fluids in your engine, brake fluid can cause serious harm if you get it in your eyes, so be sure to wear safety glasses and gloves. Brake fluid will also make your paint peel off if you spill it on your WRX, so be careful not to spill it.

When adding fluid to your WRX, it is important to check your owners manual for the correct type to add - it likely be either DOT 3, DOT 4 or DOT 5, also known as silicone brake fluid. Do not shake the fluid before pouring it in your vehicle - the air bubbles will foul up your brake lines. Be sure to discard bottles of brake fluid that are over a year old - brake fluid sucks the moisture out of the air and the water vapor in the fluid can rust out your brake lines quickly. Brake fluid breaks down with use and should be changed every 2 years in your Subaru WRX or whenever it looks dark in color - this will make the internal brake components last longer.

  • Advance Auto coupon for
    20% off entire order: KIOSK20