1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Remove Bulb - Steps to remove a burnt out bulb
4. Helpful Hints - How to find replacement bulb type and other hints
5. Replace Bulb - Procedures to replace the new bulb
6. More Info. - Additional information on front signal bulbs
The video above shows you how to change a burnt out front turn signal bulb on your 2017 GMC Canyon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Canyon's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Canyon is relatively easy - turn your hazard lights on and check the front of your Canyon and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Canyon, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit
Coolant hoses wear out over time and need to be replaced - check 'em early and often
White light when you back up - yup, they burn out and you can replace them with bright LEDs
Did you know that heat is worse for your battery than cold? Replace it every 4 years