1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Find Oil Drain - Locate the oil drain plug underneath the vehicle
4. Drain Oil - Set up the workspace, drain oil and replace plug
5. Find Oil Filter - Locate the oil filter
6. Remove Filter - Position drain pan and remove the oil filter
7. Replace Filter - Add oil to the new oil filter and insert it
8. Remove Oil Cap - Take off the oil fill cap
9. Add Oil - Determine the correct oil type and add oil
10. Replace Cap - Put the oil fill cap back on the engine
11. Leak Inspection - Start vehicle and visually inspect for leaks
12. Remove Dipstick - Locate, remove and wipe oil dipstick
13. Read Oil Level - Reinsert dipstick, remove and then read oil level
14. Clean Up Tips - How to best clean spills and deal with used oil
15. More Info. - Additional information on oil changes
This video shows you how to change the oil and oil filter in your 2017 GMC Canyon. When you change your own oil, you know that you are putting quality oil in your Canyon and that the filter is being changed too. Most importantly, you get a chance to look around under your Canyon for potential trouble spots. This video shows you the location of your oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your Canyon. For most GMCs, you can wrap an old belt around the oil filter and unscrew it by hand. If you can't do this, see our parts page to find a GMC Canyon oil filter wrench. If your Canyon is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Canyon.
Most GMCs have the oil type printed on the oil cap - it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn't printed on the oil cap, check your owners manual for the exact type before adding new oil. We recommend wearing safety glasses whenever you are working under your Canyon. You never know what could be dripping down from the engine, battery acid, engine coolant, brake fluid, etc. All of these fluids are extremely harmful to your eyes and skin so it is important to protect yourself.
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
Coolant hoses wear out over time and need to be replaced - check 'em early and often
Learn where your spare tire and jack are located before you need it on the side of the road
Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!
Driving with your phone pressed against your ear is illegal in many places. See how to talk hands free!