We are still working to obtain content for your car,
however the video above is believed to have similar characteristics as your car.
This video shows you how to add transmission fluid to your 2002 Jeep Liberty. Before adding transmission fluid, make sure that your engine was running when you checked the fluid level. If the transmission fluid level on your Liberty is low, you need to add fluid through the dipstick tube. Jeep has been developed sophisticated transmissions through years and it is critical that you add the exact type of transmission fluid stipulated by your owner's manual (typically in the back of the manual in a section titled Fluid Capacities.) When adding transmission fluid to your Liberty, be sure to add it slowly as the transmission fluid capacity is reached quickly and it is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Liberty, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber2002 Jeep Liberty Limited 3.7L V6
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!2002 Jeep Liberty Limited 3.7L V6
Burnt out brake lights increase your chance of getting rear ended - check and change yours today2002 Jeep Liberty Limited 3.7L V6
If you have an electrical component that doesn't work, try replacing the fuse first2002 Jeep Liberty Limited 3.7L V6
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2002 Jeep Liberty Limited 3.7L V6
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2002 Jeep Liberty Limited 3.7L V6