David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2004 Chrysler Pacifica. Before adding oil to your Pacifica, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Pacifica has a low oil level. For most Chryslers, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Pacifica, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Pacifica and how to add oil. Adding too much oil to your Pacifica can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Pacifica, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2004 Chrysler Pacifica 3.5L V6
Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?2004 Chrysler Pacifica 3.5L V6
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2004 Chrysler Pacifica 3.5L V6
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber2004 Chrysler Pacifica 3.5L V6
Harsh downshifts? Slipping gears? You might be low on transmission fluid2004 Chrysler Pacifica 3.5L V6
White light when you back up - yup, they burn out and you can replace them with bright LEDs2004 Chrysler Pacifica 3.5L V6