Braeger Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to open the hood in your 2005 Chrysler 300. Popping the hood on your 300 is a two step process, you need to release the hood latch inside your 300 and then you need to release the safety latch under your hood in the front of your 300. The video above shows you the location of both hood latches. Sometimes, the hood on Chryslers gets stuck and won't pop up after the interior latch is released. If this occurs on your 300, simply pull up on the hood and it should pop up for you to release the second latch. Sometimes, especially on older 300s, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2005 Chrysler 300 is probably stuck in the "open" position - push the release lever back and forth several times and then try to close your hood.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2005 Chrysler 300 C 5.7L V8
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2005 Chrysler 300 C 5.7L V8
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car2005 Chrysler 300 C 5.7L V8
Learn where your air filter is located and how to determine if it needs to be changed.2005 Chrysler 300 C 5.7L V8
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2005 Chrysler 300 C 5.7L V8
Did you know that heat is worse for your battery than cold? Replace it every 4 years2005 Chrysler 300 C 5.7L V8