Braeger Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The engine in your 2006 Ford Focus should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where the transmission fluid dipstick is located in your Focus and how to check the transmission fluid level. If the transmission fluid level in your Focus is low, you need to add transmission fluid through the dipstick tube. When adding transmission fluid to your Focus, be sure to add it slowly as it will fill up quickly and is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Focus, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
Coolant hoses wear out over time and need to be replaced - check 'em early and often2006 Ford Focus ZX3 2.0L 4 Cyl.
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2006 Ford Focus ZX3 2.0L 4 Cyl.
White light when you back up - yup, they burn out and you can replace them with bright LEDs2006 Ford Focus ZX3 2.0L 4 Cyl.
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2006 Ford Focus ZX3 2.0L 4 Cyl.
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it2006 Ford Focus ZX3 2.0L 4 Cyl.
See how to seal up minor power steering fluid leaks2006 Ford Focus ZX3 2.0L 4 Cyl.