Braeger Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to add transmission fluid to your 2006 Ford Fusion. Before adding transmission fluid, make sure that your engine was running when you checked the fluid level. If the transmission fluid level on your Fusion is low, you need to add fluid through the dipstick tube. Ford has been developed sophisticated transmissions through years and it is critical that you add the exact type of transmission fluid stipulated by your owner's manual (typically in the back of the manual in a section titled Fluid Capacities.) When adding transmission fluid to your Fusion, be sure to add it slowly as the transmission fluid capacity is reached quickly and it is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Fusion, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
If you have an electrical component that doesn't work, try replacing the fuse first2006 Ford Fusion SE 3.0L V6
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2006 Ford Fusion SE 3.0L V6
There's no reason to check the washer fluid level without adding some - see how to do it here!2006 Ford Fusion SE 3.0L V6
Low coolant levels is all to common - top yours up today2006 Ford Fusion SE 3.0L V6
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car2006 Ford Fusion SE 3.0L V6
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2006 Ford Fusion SE 3.0L V6