David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to jump start a dead battery in your 2006 Toyota Sienna. If you get into your Sienna, turn the key, and your car doesn't start (you may hear nothing or a clicking sound from the engine bay), you have a dead battery and need a jump-start. Check to see if you left your headlights or an interior light on and turn the switch off. Assuming that you have a pair of jumper cables, a pair of safety glasses and a friend to give you a jumpstart, the video above will show you where to connect the cables (and in what order!) for your Sienna. Once you are finished reviving a dead car battery in your Sienna, make sure you drive it for at least 5 minutes before turning it off so your battery isn't dead the next time.
So what's up with the safety glasses? There is a small possibility of a battery exploding during the charging process if you don't connect the cables properly (causing a spark) and there is a bunch of hydrogen gas around the battery (car batteries emit hydrogen gas when they discharge) - this is much more of an issue with cars that haven't been driven for a long time than if you drive your Sienna regularly and simply forgot to turn your lights off.
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber2006 Toyota Sienna LE 3.3L V6
Your coolant should perform well under any condition - just like Aaron Rodgers!2006 Toyota Sienna LE 3.3L V6
Got a short fuse? Don't blow a fuse, change it!2006 Toyota Sienna LE 3.3L V6
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2006 Toyota Sienna LE 3.3L V6
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2006 Toyota Sienna LE 3.3L V6
Harsh downshifts? Slipping gears? You might be low on transmission fluid2006 Toyota Sienna LE 3.3L V6