We are still working to obtain content for your car,
however the video above is believed to have similar characteristics as your car.
The engine in your 2008 Ford Edge should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where the transmission fluid dipstick is located in your Edge and how to check the transmission fluid level. If the transmission fluid level in your Edge is low, you need to add transmission fluid through the dipstick tube. When adding transmission fluid to your Edge, be sure to add it slowly as it will fill up quickly and is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Edge, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
Coolant hoses wear out over time and need to be replaced - check 'em early and often2008 Ford Edge SE 3.5L V6
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2008 Ford Edge SE 3.5L V6
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2008 Ford Edge SE 3.5L V6
Learn where your air filter is located and how to determine if it needs to be changed.2008 Ford Edge SE 3.5L V6
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2008 Ford Edge SE 3.5L V6
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2008 Ford Edge SE 3.5L V6