David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to add transmission fluid to your 2008 Jeep Commander. Before adding transmission fluid, make sure that your engine was running when you checked the fluid level. If the transmission fluid level on your Commander is low, you need to add fluid through the dipstick tube. Jeep has been developed sophisticated transmissions through years and it is critical that you add the exact type of transmission fluid stipulated by your owner's manual (typically in the back of the manual in a section titled Fluid Capacities.) When adding transmission fluid to your Commander, be sure to add it slowly as the transmission fluid capacity is reached quickly and it is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Commander, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
If you have an electrical component that doesn't work, try replacing the fuse first2008 Jeep Commander Limited 5.7L V8
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2008 Jeep Commander Limited 5.7L V8
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2008 Jeep Commander Limited 5.7L V8
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!2008 Jeep Commander Limited 5.7L V8
Is the clock in your car ahead or behind? Learn how to set it here!2008 Jeep Commander Limited 5.7L V8
If your car is leaking a small amount of power steering fluid - see this video on how to fix the leak2008 Jeep Commander Limited 5.7L V8