Add Transmission Fluid: 2010 Ford Fusion SE 2.5L 4 Cyl.

Ford Fusion Model Years - 2010, 2011, 2012

1. Getting Started - Prepare for adding transmission fluid

2. Open the Hood - How to pop the hood and prop it open

3. Remove Transmission Fluid Cap / Dipstick - Access point for transmission fluid

4. Add Transmission Fluid - Determine correct fluid type and add fluid

5. Replace Transmission Fluid Cap/Dipstick - Put the dipstick / cap back in place

6. More Info. - Additional information on adding transmission fluid

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to add transmission fluid to your 2010 Ford Fusion. Before contemplating a transmission fluid change and searching for the transmission fluid change cost on a Fusion, see if you need to add transmission fluid. How to add transmission fluid? First, make sure that your engine was running when you checked the fluid level. If the transmission fluid level on your Fusion is low, you need to add fluid through the dipstick tube or the check plug. Ford has developed sophisticated transmissions through the years and it is critical that you add the exact type of transmission fluid stipulated by your owner's manual (typically in the back of the manual in a section titled Fluid Capacities.) The manual will likely call for a specific type of Ford transmission fluid. It may state a type such as Dexron, Mercon, Allison, Type-F or CVT transmission fluid. If you are going to use a different brand of fluid such as Valvoline transmission fluid, be sure it matches the type specified in the owners manual. When adding transmission fluid to your Fusion, be sure to add it slowly as the transmission fluid capacity is reached quickly and it can be difficult to remove excess fluid if you overfill.

When to add transmission fluid to a Fusion? If you are having problems with the transmission in your Fusion, such as clunky shifting or hesitation, check the transmission fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.

  • Advance Auto coupon for
    20% off entire order: KIOSK20
2010 Ford Fusion SE 2.5L 4 Cyl. Jack Up Car Use Your Jack to Raise Your Car

Where is the jack location, jack points and other tips on jacking up a vehicle

2011 Ford Fusion SEL 2.5L 4 Cyl. Tires & Wheels Check Tire Pressure

Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw

2010 Ford Fusion SE 2.5L 4 Cyl. Lights Fog Light (replace bulb)

Don't be caught in the fog with burnt out fog light bulbs

2010 Ford Fusion SE 2.5L 4 Cyl. Lights Reverse Light (replace bulb)

White light when you back up - yup, they burn out and you can replace them with bright LEDs