We are still working to obtain content for your car,
however the video above is believed to have similar characteristics as your car.
This video shows you how to add transmission fluid to your 2013 Ford Escape. Before adding transmission fluid, make sure that your engine was running when you checked the fluid level. If the transmission fluid level on your Escape is low, you need to add fluid through the dipstick tube. Ford has been developed sophisticated transmissions through years and it is critical that you add the exact type of transmission fluid stipulated by your owner's manual (typically in the back of the manual in a section titled Fluid Capacities.) When adding transmission fluid to your Escape, be sure to add it slowly as the transmission fluid capacity is reached quickly and it is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Escape, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2013 Ford Escape SEL 2.0L 4 Cyl. Turbo
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it2013 Ford Escape SEL 2.0L 4 Cyl. Turbo
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2013 Ford Escape SEL 2.0L 4 Cyl. Turbo
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit2013 Ford Escape SEL 2.0L 4 Cyl. Turbo
Harsh downshifts? Slipping gears? You might be low on transmission fluid2013 Ford Escape SEL 2.0L 4 Cyl. Turbo
Coolant hoses wear out over time and need to be replaced - check 'em early and often2013 Ford Escape SEL 2.0L 4 Cyl. Turbo