Consumer Review Video - 2009 Chevrolet Traverse LT 3.6L V6

Car Displayed: 2009 Chevrolet Traverse LT 3.6L V6

The 2009 Chevrolet Traverse LT is a very difficult vehicle to maintain and is only recommended to those capable of vehicle maintenance. To change the highbeam bulb with reliability you will have to use many tools to work in many areas of the vehicle so that you can remove the entire housing. To change the headlight bulb, you will have to peel back the wheel well lining. This lining can grow tight to the vehicle. Changing the reverse light can be a problem, as you will have to remove a large panel from the rear of the vehicle.

Some things are easier on the 2009 Chevrolet Traverse LT. The interior fuse box is easy to access. The fuse box cover pulls down with just a small amount of effort. While you will have to remove the tail light housing for access to the taillight bulbs, the housing itself is easy to remove. You only need to remove a few bolts and pull on the housing to remove it. To reach the engine air filter you only have to disengage a few torx bolts and one 8MM bolt.

Other videos you might find helpful

2012 Chevrolet Traverse LS 3.6L V6 Air Filter (Cabin) Check

Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit

2012 Chevrolet Traverse LS 3.6L V6 Oil Add Oil

Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!

2012 Chevrolet Traverse LS 3.6L V6 Hoses Check Hoses

Coolant hoses wear out over time and need to be replaced - check 'em early and often

2009 Chevrolet Traverse LT 3.6L V6 Lights Tail Light (replace bulb)

The burnt out tail light: classic reason for a cop to pull you over - change yours now

Author

Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.