Consumer Review Video - 2013 Scion FR-S 2.0L 4 Cyl.

Common problems and easy repairs on a 2013 FR-S

The 2013 Scion FR-S is a relatively easy vehicle to maintain, and a good choice for someone experienced in vehicle maintenance. Changing the engine air filter is no problem, as you only have to disengage a few fasteners for access to the filter. These fasteners are easy to disengage. The headlight is easy to replace, as you only have to reach behind the housing for access to the bulb. Checking the oil level is easy to do, as the oil dipstick is easily accessible in the engine bay.

Some things are more problematic to repair on the 2013 Scion FR-S. Changing the front wiper blade with reliability will require some tools. Other models do not require tools to complete. You will have to peel down a panel under the vehicle for access to the petcock. This is tougher access than on other models. To change the cabin air filter, you will have to lower the glove box first. This would have been easier if there were designated access panels in the rear of the glove box for access.

Author

Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.

Replace reverse light

White light when you back up - yup, they burn out and you can replace them with bright LEDs

2013 Scion FR-S 2.0L 4 Cyl.

Check for a blown engine fuse

Odd electrical problems that come out of nowhere can often signify a blown engine fuse - check and change yours here!

2013 Scion FR-S 2.0L 4 Cyl.

Secure precious cargo

You love your kids right? See how to properly secure their car seat.

2017 Toyota 86 2.0L 4 Cyl. Coupe (2 Door)

A/C blowing hot air?

If your car blows hot air when your air conditioner is turned on, try recharging the freon first

2013 Scion FR-S 2.0L 4 Cyl.