How to Add Coolant: 1994 Ford Probe 2.0L 4 Cyl.

Ford Probe Model Years - 1993, 1994, 1995, 1996, 1997

How to check and refill coolant in the 1994 Probe with step-by-step instruction to find the fill line on the reservoir

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

1994 Mercury Tracer 1.9L 4 Cyl. Sedan Clock Set Clock

Is the clock in your car ahead or behind? Learn how to set it here!

1994 Ford Probe 2.0L 4 Cyl. Power Steering Fluid Fix Leaks

If your car is leaking a small amount of power steering fluid - see this video on how to fix the leak

1994 Ford Probe 2.0L 4 Cyl. Lights Tail Light (replace bulb)

The burnt out tail light: classic reason for a cop to pull you over - change yours now

1994 Ford Probe 2.0L 4 Cyl. Oil Add Oil

Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Adding engine coolant (also known as antifreeze) to your 1994 Ford Probe is pretty easy. Engine coolant / antifreeze circulates through your engine to keep it cool in the summer but won't freeze in the winter. Make sure to check your engine when it is cold for an accurate reading. The video above shows you where the coolant reservoir in your Probe is located and how to add coolant / antifreeze. Be sure to check your owners manual to determine the correct type of fluid to add - for Fords, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant / antifreeze with distilled water so that you have a combination of 50% coolant and 50% water. Some coolants will come premixed-that is, you don't need to add any water. These coolants will typically say 50/50 or pre-mixed on the front of the coolant bottle.

Removing the coolant reservoir cap on a warm engine could cause the cap to fly off at a high rate of speed and fluid to spray out of the reservoir. Always wear safety goggles when working on your Probe. Promptly wipe up any spilled fluid as it is highly toxic. Animals love its sweet taste, so even a spilling a small amount on your garage floor can end up in the dog's stomach pretty quickly. If you notice an oily surface in your coolant, immediately have your mechanic inspect your Probe for head gasket leakage

  • Advance Auto coupon for
    20% off entire order: KIOSK20