1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Remove Oil Cap - Take off the oil fill cap
4. Add Oil - Determine the correct oil type and add oil
5. Replace Cap - Put the oil fill cap back on the engine
6. More Info. - Additional information on adding oil
The video above shows you how to add oil to your 1999 Jeep Grand Cherokee. Before adding oil to your Grand Cherokee, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Grand Cherokee has a low oil level. For most Jeeps, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Grand Cherokee, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Grand Cherokee and how to add oil. Adding too much oil to your Grand Cherokee can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Grand Cherokee, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber
Harsh downshifts? Slipping gears? You might be low on transmission fluid
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!
White light when you back up - yup, they burn out and you can replace them with bright LEDs